新闻资讯

联系我们

行业资讯

网站首页 » 新闻资讯 » 行业资讯

Comparison of the cost of kerb stone and traditional mid-cut

时间:2020-03-20 04:56:53  来源:  总浏览:66   字体:16px | 14px | 12px

Dafon Machinery Kerb Stone Complete Equipment Production Advantages

The traditional processing method of Kerb stone is to cut in the middle, take the processing of 120/300/600 mm specifications and 

the daily output of 25 cubic meters (20 hours) as an example:

Traditional medium-cut processing requires 1.5 large-cuts, and daily output of 5 cubic meters/set requires 5

If using a set of Dafon Kerb Stone Single-Pole Fixed Length Equipment:

1. Labor: can save 3-4 people (cost can save 60-70 yuan/cubic)

2. Site: Save about 2-3 sets of mid-cut positions

3.Blade: Because the Dafon kerb stone combination saw uses multiple saw blades and less cutting, the loss of the blade is reduced, the 

processing standard is improved, and the cost of the blade is saved by 20 yuan/cubic

Take the cutting of 0.15 * 0.15 * 1-meter road stone as an example

Type

medium-cut

Kerbstone combination saw

Segment cost

80 yuan/pcs

160 yuan/pcs

Output per segmentm³

2.025

90m³/12pcs=7.5

The cost of per cubic per segment

80/2.025 is about 40 yuan

160/7.5=21.3 yuan

Comprehensive cost savings: around 80 yuan / cubic

kerb stone cutting machine