News

联系我们

Industry News

网站首页 » News » Industry News

Causes the problem of easy collapse when the stone is cut

时间:2021-02-02 09:37:47  来源:  总浏览:634   字体:16px | 14px | 12px

Saw blade problem

1. The saw blade does not match the nature of the stone

When the saw blade does not match the nature diamond cutting machine of the stone, it is easy to cause the stone to collapse when cutting the board. You cannot use a granite saw blade to cut marble, nor can you use a marble saw blade to cut granite. For some easily collapsed stones, sharp saw blade cutting boards with high diamond mesh and denser granite cutting and polishing machines surface density should be used.

2. The new saw blade is not edged

The sharpness of the new saw blade is not high when the blade is not sharpened. In this case, the cutting board may cause the stone to collapse granite polishing machine prices and the edges will appear cnc stone machine for sale jagged.

3. The saw blade is not sharp

As the use time of the saw blade increases, the sharpness of the saw blade decreases. If you do not use refractory bricks to sharpen the knife to improve the sharpness of the saw blade, continue to cut the board with an slate cutting machine unsharp saw blade, which may cause the surface of the stone to collapse. Figure 4 Sharpening the knife.

4. The saw blade loses teeth

If the saw blade is used to cut the board after the saw blade loses its teeth, the performance of the saw blade has been greatly reduced, which may cause multi blade granite cutting machine the surface of the cut product to collapse.

5. The saw blade is consumed

The saw blade is replaced in time after the blade is consumed, and it can no longer be used. The board cut by this saw blade may marble stone cutting collapse.

granite